How to update on TV

In cases where the TV has incorrect operation, which is manifested in a deterioration in the quality of the application (errors may appear), as well as a noticeable decrease in Internet speed. The reason for this may be an untimely software update. The new version of the software allows you to maintain the technical relevance of the device and eliminate errors made in previous versions.

It is possible to update the software on a TV or android yourself without contacting a specialist. To do this, you need: spend a little of your time, the presence of a USB drive or Internet access on TV.

All newly released updates can be found on the official website of the manufacturer. Then you need to - determine the existing firmware version and compare with the version number on your model. If the versions match, then the device does not need to be updated.

There are two ways to update the software version on the TV.

1. Via the Internet on TV;
2. Using the downloaded software from the official website of the manufacturer.

For the first method, you need the presence and support of an Internet connection. Depending on the model, you can use a local wired network using a TV router. It is also possible to install via Wi-Fi, but in this case the TV must support this type of connection.

In the case of the second method, you must have a USB drive with a capacity of more than 4 GB, and it must also support the FAT32 file system. In addition to the drive, there must be a computer with Internet access to search for and download updates.

IMPORTANT! The TV must have a workable USB connector.

The second installation method is the safest compared to the first, but it takes longer to spend time.

Before you begin the upgrade, you must determine the installation method. Basically, the choice depends on the technical characteristics of the model. It is forbidden to turn off the TV during the update.

ATTENTION: If during installation the connection fails, then fixing the incorrect installation using the remote control will fail

Update via the Internet.When updating software using the Internet on TV, you must pay attention to the speed and quality of data transfer, as well as determine the version of the firmware. In automatic mode, proceed as follows:

1. Go to the TV settings;
2. Find and select "Software Update" in the "Support" section;
3. After which the message "Update Now" should appear;
4. It will automatically search for newer software;
5. After the search is completed, you must confirm the installation;
6. The installation process will begin;
7. When the update is complete, the TV must be rebooted.

The next time you start the TV, it will function with the new software.

Update through USBThe first thing to do is go to the manufacturer’s website and download the software file to your computer. When choosing software, pay attention to the language, as It may make installation difficult. Then, the USB drive must be formatted in the FAT32 file system. Copy the downloaded file from your computer to the drive.

Reference: Mostly downloaded files are archived. Files must be unzipped, and then only copied to a flash drive.

The following are required to install the software:

1. Insert the drive into the USB port of the TV;
2. Using the remote control from the TV go to the menu "Update Software";
3. Choose the update method using a USB drive.

The search process begins, and then the installation of a new version of the software from the drive. Do not touch the drive during installation. Upon completion of the process, the TV will turn off and start already with the new software.

Updating TVs must be done at regular intervals. To determine the frequency, you need to trace the appearance of available software for your TV model on the manufacturer’s official website. As a rule, after installing a new version of the software, faster TV operation is observed, as well as errors are eliminated and failures stop. In some cases, new features and additional functions may appear.