Sizes of mattresses

It is difficult to ensure a healthy, full sleep without a properly selected mattress. Filler, fabric, level of rigidity, environmental safety, the size of the mattress - everything is important, expressed in a formal language, in the organization of a berth.

With the dimensions of the mattress is just the case when it is very convenient to apply standardization. This is important for industry and trade, and convenient for customers. Standardization is based on the fact that the spread in the growth of people in different age groups is relatively small, and on the fact that one, two, or at most three people sleep on the same bed, given the child.

For this reason standard mattress length fits within 120-200 centimeters, the width is 60-120 centimeters, and the thickness depends on the type of mattress and on the type of fillers.

Naturally, there are not so few exceptions. There are a lot of people who are two and more meters tall, there are non-standard beds too. For these cases, manufacturers are ready to produce non-standard mattresses, not forgetting, usually, to take an additional fee for this.

That is, mattresses can be any size, and even buyers with exotic requirements will not find a particular problem. And standardization greatly facilitates the process of assembling a full-fledged berth for the mass consumer.

Important! In the USA and some other countries the inch system of measures is adopted, in Europe - metric. Close-sized mattresses, like beds, will differ by a few centimeters, which at certain times can be critical.

Standard mattress sizes

If with a single or double beds (and therefore mattresses) everything is clear, then one and a half requires some explanation. It is intended for those who like to sleep freely, without limiting themselves in movements. In such a bed, one of the parents with the child can sleep successfully.

Children's mattresses have a very large variation in size, for a natural reason. The growth of children of different age groups varies greatly, as does the weight. As for non-standard mattresses, manufacturers often understand this word not literally, but simply supplement the standard table with other sizes. But most will still undertake to make the product exactly according to the sizes that the customer will indicate.

Double sizes

The table shows the standard sizes of mattresses for double beds in the metric system.

No. p / pStandard sizes, cm
1.140 x 190
2.140 x 195
3.140 x 200
4.160 x 190
5.160 x 195
6.160 x 200
7.180 x 190
8.180 x 195
9.180 x 200
10.190 x 190
11.190 x 195
12.190 x 200
13.200 x 190
14.200 x 195
15.200 x 200

Double mattresses are considered, the width of which starts from 140 centimeters. The length starts from 190 centimeters in increments of 5 centimeters. There are a lot of non-standard double mattresses, as well as lovers of huge beds. But in this case, each manufacturer determines its own size options.

Here, probably, an example of the difference in the size of mattresses produced using the metric and inch systems should be given. Mattresses with the same name King size in the European version have a size of 200 x 200 centimeters, in the American - 80 x 78 inches. In centimeters this is 203.2 x 198.1. If the fact that two centimeters are not enough is not very scary with the lamella support for the mattress, then three extra centimeters can already create a problem. Therefore, care should be taken not to buy a European mattress under an American bed and vice versa.

Dimensions one and a half

The table contains the sizes of one and a half mattresses, which are considered to be standard.

No. p / pStandard sizes, cm
1.120 x 190
2.120 x 195
3.120 x 200

One and a half mattresses, as already mentioned, are intended for those who are not comfortable on a single bed, or if a child should be sleeping nearby. One and a half mattress is considered, the width of which is 120 centimeters. Why exactly, hardly anyone can explain, but the tradition is strong. It so happened, and if there is a demand for such mattresses, the name does not have much significance.

Single sizes

The table with the sizes of mattresses for single beds is below.

No. p / pStandard sizes, cm
1.80 x 190
2.80 x 195
3.80 x 200
4.90 x 190
5.90 x 195
6.90 x 200

Sometimes the standard width includes meter width of single mattresses.

Many, looking at single mattresses, find that they are mainly used by supporters of the Spartan lifestyle. The width of 80 centimeters for an adult is not too big, but restrictions can vary. For example, the area of ​​the room simply does not allow you to put another bed. Or, again, a mattress of this size is ideal for teenagers, "for growth."

Often also double beds are equipped with single mattresses. An ideal solution if spouses require a mattress of different degrees of rigidity. In this case, the family bed is united by a common mattress cover.

Sizes of children's mattresses

Children's mattresses are a rather large group of products, given the size. But it is customary in the standards to consider children's mattresses that are for children from birth and up to six to seven. There is no special group for teenagers, although in reality such beds are produced. Again, many teenagers prefer to buy "adult" mattresses, which is absolutely logical in terms of cost savings.

Children's are mattresses, the sizes of which are indicated in the table.

No. p / pStandard sizes, cm
1.60 x 120
2.70 x 140

Manufacturers, as usual, are less conservative than standards, therefore, they offer the consumer children's mattresses with dimensions in width in the range of 60-80 centimeters, and in length - 120-160 centimeters.

Sizes of round mattresses

Round mattresses also have their own size classification. Smaller ones are considered single, large ones - one and a half and double.

The diameters of round mattresses are given in the table.

ViewStandard sizes, cm
Single200-210
One and a half220
Double230-240

Custom sizes

Basketball players, whose height often exceeds two meters, need beds (and mattresses) of appropriate length. Statistics indicate that the number of people of high growth is approximately the same, if we take as a percentage. The industry cannot ignore this group of consumers; for them, mattresses are made to order.

Non-standard is not only length, but also width. If, for example, there is a bed to which you cannot pick up a mattress in the store, you will have to take advantage of the possibilities of an individual order.

Typically, manufacturers add their list of sizes to standard sizes. But if there is no required one, you can simply order a mattress according to your own parameters. Sometimes it costs more, sometimes not.

Mattress Height

The height of the mattresses depends on the filling. Springless mattresses are usually a little thinner, their thickness varies between 15-24 centimeters. The most common sizes are in the range of 16-18 centimeters.

Mattresses on springs have a height of 18 to 50 centimeters. The most popular in thickness - within 20-22 centimeters. Half-meter thick mattresses are usually assigned to the premium level, they cost according to the declared status.

There are very thin mattresses, their height - from two centimeters. They are designed either for sofas, or for mattress covers, which adjust the rigidity of the main mattress.

The height of the bed with the mattress from the floor is an average of 50 cm to 75 cm. It all depends on the model of the mattress and bed.

How to choose the right mattress size for your bed

It is believed that fifteen centimeters of the margin of the length of the mattress relative to growth is enough for a comfortable sleep. But if there is more, it will not be worse for sure. A large bed will allow you to use large pillows, and its owner will feel more comfortable. Again, restrictions are imposed by the size and layout of the room in which the bed will be installed.

How to determine which bed size is right for you

Choosing a bed for yourself, when it comes to family, is a little more difficult than for one person. Of course, the complexity is relative, but usually such decisions are made by the husband and wife together.

How to determine what size is suitable for husband and wife

As indicated in the table above, the standard sizes of double beds range from 140 to 200 centimeters in width, and from 190 to 200 centimeters in length.

The length is selected taking into account the growth of the tallest of the spouses, plus 15 centimeters. Width - ranging from 160 to 180 centimeters, depending on the build and personal preferences. If a child sleeps with parents, it is better to immediately take a two-meter wide bed.

Watch the video: 6 Mattress Sizes - Tips to Avoid Picking the Wrong Mattress Size (March 2024).

Leave Your Comment