A humidifier is needed to increase the humidity in the room. The climatic device avoids dry skin, dehydration. It also supports immunity, helps relieve fatigue, and increases concentration. Humidifier has a positive effect on the condition of man and indoor plants. His work is based on the allocation of steam. This allows you to increase the level of humidity, so that the climatic conditions of the room come back to normal.
Equipment may break. If the steam stops leaving the equipment, then something is wrong with the unit. Therefore, you should diagnose the device to identify the cause of the breakdown and eliminate it.
Reference! Some breakdowns can be fixed by yourself. But if the reason is serious, it is recommended to contact specialists in order not to spoil the equipment completely.
Possible causes of malfunction due to which steam does not come out of the humidifier
There are several reasons why steam may stop coming out of the humidifier. Among them:
Generator damage. To determine the quality of its work, remove the cover from the bottom of the device. Gently plug it in for a few minutes.
Attention! It should be followed with extreme caution. Do not touch the inside of the equipment by performing the above action.
After you need to turn off the device, be sure to unplug the plug from the outlet and touch the radiator of the transistor located on the electronic circuit. If it is cold, then the generator is not working.
- Oxidation of contacts. Provide a similar situation can get liquid inside.
- Fan failure. To check the operation, use a multimeter. With it, the voltage across the turbine windings is measured. If it is present, but the fan is not functioning, then this is the problem. Part replacement required. It is important to choose a suitable fan for the dimensions.
- Membrane damage. The presence of a characteristic gurgle without steam release indicates problems with the fan. Otherwise, the absence of such sounds means that the membrane is malfunctioning.
- Problems with air intake filter. The presence of characteristic gurgling and fan operation means that it is worth checking the filter. Sometimes steam problems occur because this part is clogged. Replace air intake filter.
- Faulty power board. If, by measuring the voltage of the turbine windings, its absence is detected, then the problems are related to the power board.
Debugg
After identifying the cause, it is important to correct it. Some parts can be replaced by yourself. But in most cases, you have to contact the service center with professionals to eliminate the defects that have arisen.
Defective parts, for the replacement of which you need to contact a specialist in the repair of household appliances
If it is a fan, generator or power board, then it is worth calling a specialist. In the first case, a complete replacement of the part will be required. It is important that the fan is sized. Correcting problems with the board or generator will not cause large financial costs. But it’s better not to try to fix the situation yourself. You can damage the equipment even more, which will lead to the need to purchase a new humidifier.
Defective parts that you can replace yourself
Parts like a membrane or filter can be easily replaced on their own. To eliminate such malfunctions, you do not need to have special skills. If the air filter is clogged, you must purchase a new one and replace it. If the membrane breaks, it also needs to be replaced. You can purchase this item at a radio store or service center.
The humidifier helps to normalize the humidity in the room, which favorably affects the state of health, human skin. When it stops releasing steam, then repair is required. After all, the main task of the device is to release steam, with the help of which an increase in the level of humidity occurs. After determining the causes of the breakdown with the help of diagnostics, you should call a specialist or repair the malfunction yourself.
Leave Your Comment