How to set up a joystick on a dandy emulator

When installing an emulator on a computer, you must not only download the program, but also connect the appropriate control to create a console effect. Dendy consoles use special joysticks with their own control circuit. They can be connected to the computer via USB cable or synced via Bluetooth.

However, sometimes it happens that even with the correct connection, the controller does not respond to keystrokes. In our article we will talk about how to configure and the possible reasons for the lack of work joystick.

After you have connected the joystick to the computer, it should become the main device for controlling the emulator. If this does not happen, most likely, it is incorrectly configured. To activate the controller, you need to perform the following points:

1. Check the connection of the joystick (in the case of the wireless version, charge it).
2. Launch the Dendy emulator application.
3. In the main menu, select Config. If the button does not appear on the main screen, you can right-click on any point on the screen and open a dialog box. In it, find the tab with the appropriate name.
4. Typically, the default emulator uses a keyboard to control. From the list, select your controller to connect and activate.
5. Now configure the digital work format to match the console settings.
6. Additionally, you can adjust the power of vibration in the appropriate section.
7. In the key configuration window, edit the necessary commands and assign each button its own action in the game.

TIP: You can save the current settings or adjust them, adjusting to the new game. Try several options to choose the best one.

The setup process does not take much time and is fairly easy to complete. But sometimes users have difficulty in connecting and configuring. Here is a list of some of them:

• Incorrect connection due to mismatch of controller format for a particular game.
• Mechanical damage and failure of equipment.
• The absence of an installed emulator program and its settings.
• With command settings, you can specify only one action for one button. When you re-enable the key, the last option is saved.