How to set up a keyboard on a windows 7 computer

Before setting the keyboard "for oneself", the user should carefully study the techniques used for this purpose. Only after that, he has the right to rely on the full use of all its functionality and increase the speed of dialing.

What are the ways to configure

After the input device for printing characters is connected - you should rebuild it in such a way as to work with a computer or laptop as convenient as possible.

Among the known options for this procedure, the following can be distinguished:

1. Setting the basic parameters of the connected device.
2. Setting language standards.
3. Select a keyboard shortcut to switch the language layout.

Consider each of these components in more detail.

Basic setting

The basic settings for Windows 7 involve the installation of the basic parameters of the keyboard as an input device. The procedure in this case is as follows:

1. The "Control Panel" is called first.
2. After going into it, you should install the "Large Icons", and then go to the "Keyboard" section.
3. After clicking the button with the mouse on it, the Properties window should open with the Speed ​​tabs and next to it is Equipment (photo on the left).
4. When switching to the first one, several slider positions will be found, one of which is responsible for the delay before repeating and the second for the permissible speed of entering repeated characters.

With their help, the most suitable parameter values ​​are selected for operation. You can check the correctness of their detuning in the line below.

Note! An acceptable cursor flicker is set here.

The "Hardware" tab displays all devices of this type. By clicking on the "Properties" insert, you can get comprehensive information about each of them, namely (photo on the right):

1. View its status (what and how it works).
2. Get the necessary information about the driver and figure out whether to remove it for the purpose of updating.
3. Select power options, that is, indicate that using the keyboard you can bring the PC out of sleep mode.

The latter option is present only in some versions of Windows 7, however, it does not have a determining value for the operation of a peripheral device.

Languages ​​and Regional Standards

For the correct interpretation of the characters entered from the keyboard, it is important to correctly configure its layout, the selection icons of which are displayed in the notification panel. To exit to the appropriate menu, you will need to do the following operations:

1. Call the context menu of the language bar and select the "Parameters" item.
2. When the "Language and Regional Standards" window appears, click on the "General" tab (photo on the left).
3. Next, you should choose one of the languages ​​that will be considered the main one by default (it is installed automatically when the PC starts).

Additional Information! If there is no language bar, you can go to the "General" tab through "Language and regional standards".

After that, go to the tab "Language bar" and fix it in the tray. To assign a keyboard shortcut through which the layout will change, you need to select the tab "Switch keyboard (next to" General). In it you need to select a convenient combination, and then click on the "Change" field.

How to set up a keyboard on Windows 7: step by step

A typical keyboard setup methodology for Windows 7 includes the following operations:

• First, the user adjusts the character input rate and changes the retry delay according to the algorithm already considered earlier.

Important! For novice users (beginners), it is advisable to choose the value of the second of these parameters as much as possible.

1. Over time, when there is a certain experience with the keyboard, the retry delay can be reduced.
2. At the next step of the configuration operations, you need to choose the basic layout.
3. After loading the OS, the default language should be displayed in the corresponding panel located next to the tray.
4. Having opened by means of its context menu, it is possible to configure language standards in a form convenient for each individual user.

Particular attention should be paid to setting up automatic switching of the layout, the need for which most often arises when you have to work with two languages ​​at once. For these purposes, a special application called "punto switcher" is most suitable, the installation of which is also referred to as tuning procedures.

The installed utility provides automatic layout change, which is selected by tracking the sequence of pressing individual keys. The user in this situation does not participate in its change. The category of settings when working in Windows 7 includes the elimination of the problems that arise during this.

Troubleshooting

The main problem areas of a technical nature include:

1. The system cannot "determine" this keyboard model.
2. The lights on the display do not indicate normal operation.
3. The batteries are discharged (wireless models).

To resolve these problems, you will need to check the correct connection of the device to the PC and the condition of the wires through which it is connected to the USB port.

Note! The wires should not be clearly visible damage in the form of sharp fractures and notches.

In wireless samples of products of this class, if problems arise, the first thing to do is to reset the “dead” batteries.

If the configuration is carried out when connecting a keyboard with non-standard functionality - Windows 7 may simply not recognize it. This is most often explained by the fact that the system does not have a driver suitable for this device. In this case, you will need to download it from the disk supplied with the keyboard or find the appropriate software on the Internet. It is usually posted on the official website of the manufacturer of this model.