Why there is a dull sound in the headphones on the computer

Headphones are a necessary attribute of a modern person, without which it is already difficult to imagine everyday life. With their help, we can listen to music, communicate with each other, watch films and other video files, not only entertaining in nature, but also necessary for work.

But sometimes you have to deal with the appearance of breakdowns or other troubles like a too quiet sound, the appearance of strange sounds or a dull sound. Do not rush to throw out headphones and buy new ones - you can try to cope with the problem yourself. You will learn how to do this in this article.

Reasons for a dull sound in the headphones

The first step is to find out the cause of the trouble. As in many other cases, there may be several, but understanding the problem will help to cope with it - so you can find an algorithm that will help return the device to normal operation.

One of the most common causes is poor wire contact inside the jack. This can happen because the device is used too actively - for example, if you always carry headphones with you. From frequent bends and movements, the jack may be damaged, which causes a dull and not too pleasant sound during playback.

A wire break is also often found - thus, the necessary contact is lost. Even owners of fairly expensive models have to deal with this problem. This does not indicate the manufacturer’s dishonesty, as it might seem at first glance, so do not rush to look at the models of another brand, if you decide to buy new headphones, you will come across the same thing. The fact is that European standards allow manufacturers to solder parts with only one type of substance.

REFERENCE! This is done in order to preserve the ecology of our planet. But unfortunately, such substances are the least durable, which leads to the appearance of such troubles.

In another case, cable breakage may occur due to too much load on it. That is why in no case should you pull the wires sharply, and also put something heavy on them or run over with the wheels of a comfortable computer chair. Very often this problem is difficult to notice, but in the end you will have to replace the entire cable, which is very difficult to do on your own.

Other possible causes of malfunctions include water entering the device and breaking the connection jack. As you can see, most often a muffled sound appears precisely because of improper use of the headphones, so be careful and careful in the future.

What to do if there is a dull sound in the headphones on the computer

First of all, check the file itself - disconnect the headphones and listen to it using the speakers. It sometimes happens that a file downloaded somewhere is deformed or is badly recorded, so it is impossible to listen to it in good quality.

Then go to the "Control Panel" and change some settings. Perhaps the sound is just too quiet and increasing the volume will fix the problem. Go to the "Hardware and Sound" folder and find the "Manage Sound Devices" button. Then, in the “Recording” tab, click on “Stereo Mixer”. Select the maximum value on all the items that appear - this way the volume will increase and you can evaluate the sound quality.

If this does not help, then, most likely, the problem is in physical damage. Then you have to determine the problem and replace the broken element - it can be a plug or a wire, depending on the damage received.

In addition, you can try to clean the headphone jack - it is possible that dirt has accumulated in them, which interferes with the high-quality playback of the necessary files.

ATTENTION! The exact solution can be called only knowing the cause of the problem. Therefore, if you can’t determine it yourself, you can only go to specialists.

Now you know why a dull sound may appear in the headphones and what you can try to do with it. In most cases, the simple operations described above help the device again play all the necessary files with high quality and without the “pipe effect”.