Laminate is a common and popular option for flooring, requiring a certain basis for its installation. If all the necessary conditions are not met for operation, then the service life of the floor covering is reduced. For example, the quality of the laminate does not depend on the quality of the repair work.
How long does the bulk floor under the laminate dry?
When using laminate flooring, hosts can face many problems:
- the appearance of a creak;
- discrepancy of boards;
- swelling;
- irregularities;
- deformation.
All these problems can arise due to the use of thick substrates, as they can become deformed over time. Their use is due to the fact that such a layer is chosen as the leveling layer. This is the most common problem.
During tile laying, a flat surface is achieved by applying special glue. There is an opinion that the laminate can be laid with glue, using a substrate. Laying this material requires a reliable, uniform surface during the life of the product. To do this, the surface can be leveled with a bulk floor.
Reference: It should be noted that the laminate can withstand a base drop of 2-3 mm per square. m. If the base was not ready, then with the maximum parameters of the differential, certain factors influence the mechanisms.
When choosing the right gender, you should pay attention to:
- width
- length
- the dimensions of the room in which repairs will be carried out. Usually, many people pay attention to the difference in floor height, fill. The choice of gender will depend on these factors. For example, if you have made the necessary measurements, it is recommended that you select the appropriate solution for certain parameters:
- composition;
- drying period;
- percent shrinkage;
- thickness of filling.
Typically, the solution is selected according to the thickness of the filling. There are different types of floors designed for decoration. These types of filling are used in supermarkets, restaurants, cafes, and in many public places. Various coatings are laid on them, from different materials.
The cost of the floor depends on the selected mixture. Mixtures may vary in composition and cost. When they have plasticizers, the solution is better leveled. A floor thickness of 2-5 mm for the laminate is optimal.
How many different types of bulk floors dry
How long does a bulk floor under a laminate dry? To find out the period of work to create a base in the form of a self-leveling floor for the material, you need to find out how long the floor will dry if it is possible to lay the coating after pouring. Everyone knows that after pouring, it is difficult to lay the coating.
Laminate flooring during the entire period of use will be in good condition if it is laid on a special flat surface. One of the best methods for laying this surface is a bulk floor. This coating is obtained by laying the solution in a liquid state, under the influence of gravity on a finished base.
After drying the special solution, a smooth, smooth surface is obtained, it is used as a substrate for the selected coating material.
What to make the bulk floor dry faster
How long does the floor screed under the laminate dry? Drying period will depend on:
- by type;
- its composition;
- temperature in the room;
- humidity.
When using cement mortars, flooring should be done no later than every other day. After a period of one week, you can step on the floor, remove garbage from it. When drying has occurred, the shade can change from dark to light, and you can begin laying the laminate on the surface.
Basically, the bulk floor dries completely after 3 weeks. Much depends on air humidity, heating in the room. With the use of quick-drying cement, the period of work can move, become 7-9 days faster.
Important: If solutions with components in the form of polymer resins are used, the drying period will be -3-47 hours. In this case, the floors are good when using acrylic resins, their drying time is 3-5 hours. For polystyrene or polyurethane surfaces this period maybe - 10-12 hours
When using a composition based on epoxy resins, a longer curing process is required - up to 2 days. Drying time will depend on the room temperature, on the material used. Such surfaces are resistant and durable to environmental influences, they are used in various industrial conditions, in hospitals, industry.
When manufacturing the floor in several stages, any layer must be applied if the previous one is completely dry. The drying period can be calculated by multiplying the number of layers by the period of manufacture of one layer.
Leave Your Comment